Production and installation of a transfer table in Paderborn

The customer is Deutsche Bahn AG

Technical Specifications
  • Length: 12.1 m
  • Effective length: 10.5 m
  • Length of the ramps: 2 x 0.8 m
  • Width: 5.89 m
  • Rated capacity: 40 to
  • Rated capacity of track flaps: 20 to per track flap
  • Ramp height: 143 mm
  • Lowering: 70 mm
  • Railway tracks of the transfer table panel: 2-track, original
  • Gauge of the track rails: 8,990 mm
  • Number of running gears: 4
  • Number of carrying wheels: 16
  • Wheel flange diameter: 315 mm
  • Number of driven carrying wheels: 4
  • Drives: Geared brake motors
  • Travelling drives: 7.5 kW (S1 motors)
  • Guidance of the transfer table: 2 single flanged wheels and 2 flangeless carrying wheels per running gear

 

 

  • Track gauge on transfer table 1,435 mm
  • Running speed: continuously adjustable up to 90 m/min (frequency converter controlled)
  • Positioning speed: 1 m/min constant
  • Ambient temperature: -20 ... +40 indoor operation
  • Operating voltage: 400 V / 50 Hz
  • Control voltage: 230 V AC / 24 V DC
  • Degree of protection, control cabinets: IP 55
  • Degree of protection, sensors: IP 65
  • Signalling and warning equipment: Signal horn, 4 flashlights (type Pfannenberg PAB 100)
  • Power supply: Safety contact conductor
  • Control: Siemens S7 programmable control system
  • Total connected load: approx. 50 kW
  • Operator control stand: 1 main operator control stand, designed as swivel stool (180°) with integrated control panel, positioned to the side on the transfer table
  • 2 auxiliary operator control stands on the opposite side
  • Operation: via control panels at the operator control stands

Go back