Fully sunken frameless transfer table for outdoor use in Braunschweig

MSD planned, produced and delivered a fully sunken frameless transfer table, 26 m long and with 150 t capacity, for outdoor use by Deutsche Bahn AG.

The transfer table is used in DB's Braunschweig depot.

Technical Specifications:
  • Effective length: 26 m
  • Rated capacity: 150 to
  • Railway tracks of the transfer table panel: 4-track
  • Wheelbase of the track rails: 9,520 mm – 5,230 mm – 9,520 mm
  • Track: 80 m
  • Number of running gears: 8
  • Number of driven running gears: 4
  • Drives: Flat-gear type brake motors
  • Travelling drives: 4 x approx. 11 kW
  • Guidance of the transfer table track: Double-wheel flange running gear on one rail, all other running gears with smooth running surfaces
  • Running speed: continuously adjustable up to 60 m/min (frequency converter controlled)
  • Positioning speed: 1 m/min constant
  • Ambient temperature: -20 ... +60 Outdoor operation
 
  • Operating voltage: 400 V / 50 Hz
  • Control voltage: 230 V AC / 24 V DC
  • Degree of protection, control cabinets: IP 55
  • Degree of protection, sensors: IP 65
  • Signalling and warning equipment: Signal horn, warning bell, coloured traffic lights, 2 signalling lights
  • Power supply leads: via motorised cable drum, positioned on the side of the transfer table, cable length approx. 60 m
  • Control: programmable control system
  • Total connected load: approx. 50 kW
  • Locking: 2 mechanical bolts
  • Operator control stand: two operator control cabs, located on the side of the transfer table
  • Operation: via control panels in the operator control stands

Go back